Desktop vertical drilling milling machine - 2G125FL

Desktop vertical drilling milling machine - 2G125FL

Model - 2G125FL

The machine can be used for doing different drilling and milling jobs.

The machine has 12 steps of frequency of rotation of a spindle from 100...2600 rpm. There is a mechanism of thin submission for doing of milling jobs. The machine is supplied with a coordinate table.

TECHNICAL SPECIFICATION OF MACHINE
Maximum diameter of drilling into steel 45, mm25
Maximum sizes of an installed detail (LxBxH)600×250×200
Maximum course of a coordinate table's support, mm
- longitudinal
- cross
420
180
Spindle gap, mm260
Maximum distance from an end face of spindle to table, mm 460
Travel of the Spindle, mm 140
Dimension of spindle cone km.3
Number of spindle rotation velocities 12
Range of spindle speeds, rpm100...2000
Range of feeds, mm/rewձեռքով
Dimensions of working surface of table, mm730×210
Maximum vertical travel of arm along the column, mm250
Drive . Overall Dimensions and Mass of the table
Mains
- type of current
- frequency, Hz
- voltage, v
alternative three phase
50
380
Main drive electric motor power, KWT1,5
Number of electric motors on the machine1
Overall dimensions (LxBxH), mm1050×1080×1280
Machine mass, kg300