Radial drilling machine with an elevating rotary table - 2532L

Radial drilling machine with an elevating rotary table - 2532L

Model - 2532L

The machine can be used for drilling, reaming, margin widening, gap widening

Feature of machine is presence an elevating rotary table, which expands the technological opportunities of the machine tool, allowing to process aperture, under various corners. The rotation of the extension arm and the table round the column allows the machining of large workpiece on or outside the work plate.

TECHNICAL SPECIFICATION OF MACHINE
Maximum diameter of drilling into steel 45, mm40
Spindle gap, mm
- maximum
- minimum
1000
280
Maximum distance from an end face of spindle, mm
- to plate
- to table
1120
630
Maximum motion drilling to extension arm, mm720
Travel of the Spindle, mm320
Dimension of spindle cone km.4
Number of spindle rotation velocities12
Range of spindle speeds, rpm45...2000
Number of feeds6
Range of feeds, mm/rew0,1...1,1
Maximum comer of table rotation round column,...°+-180
Comer of table rotation concerning a barrel,...°+90
-80
Dimensions of working surface, mm
- of plate
- of table
800×1120
450×1000
Maximum vertical travel of the table along the column, mm450
Speed travel of the table along the column mm/min314
Drive , Overall Dimensions and Mass of the table
Mains :
- type of current alternative three phase
- frequency, Hz
- voltage, v
50
380
Main drive electric motor power, KWT3
Number of electric motors on the machine3
19. Overall dimensions (L x В x H), mm1850×800×2600
Machine mass, kg2050