Radial drilling portable machine - 2532L-AS

Radial drilling portable machine - 2532L-AS

Model - 2532L-AS

The machine can be used for drilling, boring, reaming, margin widening, gap widening.

The processing of inclined apertures is carried out with the help of rotation of an extension arm round of a horizontal axis. The vertical travel of an extension arm with the drilling head allows to process details of various height.

TECHNICAL SPECIFICATION OF MACHINE
Maximum diameter of drilling
- at a vertical position of the spindle, mm
- at a inclined position of the spindle, mm
32
25
Spindle gap, mm
- maximum
- minimum
1000
280
Maximum distance from an end face of spindle, mm
- to plate
1120
Maximum motion of drilling to extension arm, mm720
Travel of the spindle, mm320
Dimension of spindle cone km.4
Number of spindle rotation velocities12
Range of spindle speeds, rpm¹45...2000
Number of feeds6
Range of feeds, mm/rew0,1...1,1
Maximum comer of turn of a barrel an extension arm concerning a barrel,...°45
Dimensions of working surface,of a plate, mm900×1120
Maximum vertical travel of an extension arm along the column, mm560
Speed travel of an extension arm along the column, mm/min314
Drive . Overall Dimensions and Mass of the table
Mains
- type of current
- frequency, Hz
- voltage, v
alternative three phase
50
380
16. Main drive electric motor power, KWT3,0
17. Number of electric motors on the machine3
Overall dimensions (LxBxH), mm1710×1340×2300
Machine mass, kg2000